Big block power steering pic..

[268RTs4ME]

I am in need of a pic of a big block picture(s) of power steering pully ( Fan) and ps pump on a 74 big block, I am in process of trying to put the air, alt and p.s. back on this 440 correctly, could also us pic of alt bolt up. I think the alt and air run off of double belts around crank, a/c, idle pulley and alt., I beleive ps runs off of crank fan and ps., need to see if i have right brackets for alt, and ps pump, Just purchsed right  ac bracket off e bay, nacho sent me pics on it.. just trying to get it all right, after being butcher for years, you know how everything is  when you buy a car and it has been rigged to the dummies easiest way out instead if fixing it right. any and all pics would be appreciated. Thanks

[NHCharger]

I can give you a few pics of my 71/ 383 A/C.
Not sure if they changed anything between 71 & 74.

[Dodgecharger74]

looks the same as my 72 chrysler 440

[268RTs4ME]

Thanks alot for the pics guys, helps a bunch when your starting from scratch.. appreciated..

[Nacho-RT74]

71/72 are very diff from 73/74. On 73/74 the steering pump shares belt with water pump, for a while on 71/72 they have its own belt, getting an iddler pulley for the water pump

[Nacho-RT74]

Then also steering pump is located diff, lower than earliers ( more room because the water inlet location change ) and with one attaching bolt directly threated in to block, and not just on water pump housing, so diff brackets.

[268RTs4ME]

Yes those are the ones I need 73-74, The correct pullieds are on my balancer, now I have a guideline to go by, thank you guys for all of your help, now I can go to work...but its to darn hot outside and in the shop right now, so will wait till the sun goes down a little and turn on the fan, again thank you very much for your help.  268RTs4ME and 1 74 RR/GTX