News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Engineinstall with pulleys?

Started by Belgium R/T -68, June 25, 2009, 11:13:38 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Belgium R/T -68

June 25, 2009, 11:13:38 AM
Thought of trying to install my engine with pulleys, belts and all. Someone did it or is the risk of damages to big? :scratchchin:

Per
Charger -68 R/T 500 cui Stroker

Ghoste

#1
June 25, 2009, 11:14:46 AM
Personally I like to drop it in there with as few extras attached as I can get away with.

Belgium R/T -68

#2
June 25, 2009, 11:22:19 AM
It's a new setup I will use on my engine but maybe better to fit it while the engine is still out and remove it again before engineinstallation.
Charger -68 R/T 500 cui Stroker

Ghoste

#3
June 25, 2009, 11:25:08 AM
Oh yes, I would fit everything first to make sure.   I know there likely good arguments for doing it a number of different ways so my opinion is just that-mine.

Bob

#4
June 25, 2009, 11:29:32 AM
On my 74 I installed the engine with everything installed even the AC. Save a lot of time in the end because it is so much easier installing everything with the engine out.  :Twocents:




Print
Go Up Pages1
User actions