Dream Engine

[Jonas_N]

I want this one:

http://www.thesuperchargerstore.com/rogerdollarhide.html

And one day Im gonna have it.

[tan top]

I want this one:

http://www.thesuperchargerstore.com/rogerdollarhide.html

And one day Im gonna have it.

  i like that       nice set up !! keeps stock hood clearance also  hmmm 

[Foreman72]

I want this one:

http://www.thesuperchargerstore.com/rogerdollarhide.html

And one day Im gonna have it.

  i like that       nice set up !! keeps stock hood clearance also  hmmm 

that is pretty sweet...those paxton superchargers are awesome...

[Jonas_N]

i like that       nice set up !! keeps stock hood clearance also  hmmm 

Yeah, thats one big point why I want this, I want to hide it all under the hood. 

[tan top]

yeah ...  i'm having a long hard look at this set up 

[b5blue]

Many do not know it but those Paxton's have been around a long time, they had a setup for early TR 4's that was the cat's ass!

[Armudster]

 Hemi for me, all 540 cubic inches of a stroked one!!!!!!!!!!!!!!!!!!!!!!!!!! Too bad no DOHC Hemis can be found tough!!   

[mopar_nut_440_6]

Well if it is a "dream" engine. How about:

100 MPG
1000 Horsepower
No maintenance Required
Inexpensive
Bulletproof
300 pounds

[mauve66]

Well if it is a "dream" engine. How about:
300 pounds

of torque??

siamese bore 440 bored to the hilt, stroker kit, DEFI 6 pak from FBO, TWIN superchargers pulling air from the RO67 low profile hood scoop, and a side of nitrous when your really hungry



and i don't care about gas mileage.................... remember we're dreaming, gas is $.01 per gallon and my daddy owns the station anyway

[Landonsrt]

This is the engine I want for my car... The core charge is ridiculous!!!

http://www.shophemi.com/p-1025-440-hemi-crate-engine-by-arrington-engines.aspx

[RD]

injected, NOS'd, twin turbo'd 3.9 liter V6

[mauve66]

This is the engine I want for my car... The core charge is ridiculous!!!

http://www.shophemi.com/p-1025-440-hemi-crate-engine-by-arrington-engines.aspx

thats cause they aren't enough in the junk yards yet

injected, NOS'd, twin turbo'd 3.9 liter V6

doesn't have the right sound but i assume its a buick V6 not a mopar which would make it a big block slayer al right

[Blown70]

The one in my avatar......

[mopar_nut_440_6]

The one in my avatar......

Now you are talking brother! 

[RD]

This is the engine I want for my car... The core charge is ridiculous!!!

http://www.shophemi.com/p-1025-440-hemi-crate-engine-by-arrington-engines.aspx

thats cause they aren't enough in the junk yards yet

injected, NOS'd, twin turbo'd 3.9 liter V6

doesn't have the right sound but i assume its a buick V6 not a mopar which would make it a big block slayer al right

nope, a 3.9 liter mopar v6.. no one has done much to them in regards to performance... so.... one day i would like to.

[FlatbackFanatic]

A hemi would be nice.... but I'd just get a real good 440.

[bigroge1]

528 hemi engine

[Landonsrt]

Here's my other 440 option. No core and a little cheaper. plus they say they video building and dyno the engine for you. Plus i like thebillett pulley setup they offer.

http://www.proformanceunlimited.com/specs/440_475hp_chrysler.htm

[r_biccum]

Im happy just having the numbers matching, original bore 383... for now. Next charger will be a 318 car with a hemi 

[Mike DC]

 
I'd love to have the newer Hemi design that they were developing in the early/mid 1970s before Mopar closed its whole big block V8 program.  (I think the prototype was called the "ball stud Hemi" or something like that?)

They were in the process of creating a more tractable set of Hemi heads for the 440 wedge blocks.  Something suitable for a wide production application like the 1st-gen and 3rd-gen Hemis.  It would have been weaker than the 426 Gen-II on the dyno.  But much more practical, and physically smaller/lighter weight.




IMHO this would be the ultimate street-usable car Hemi motor in the real world. 

Make mine in all aluminum, please.

 

[694spdRT]

At this point I just want a plain 5.7 Hemi using the factory fuel injection backed by an old fashioned 4 speed. Decent power, reliability, and mpg are the goal.

[Blown70]

A fuel injected, drysumped 611 Hemi, all aluminum!!   It is a little more than a dream, it is in the works

Pics??

Sorry, no pictures. It is Tim Banning @ FHO that is building it for me. Callies billet crank/ Oliver billet rods, and CP pistons, in a World Product Aluminum block, and CNC ported Stage V heads. Missile drysump pump.

I cannot wait to see this little number!!!!!!!!!!!

[suntech]

I cannot wait to see this little number!!!!!!!!!!!

Neither can i, but there is a lot of body and chassis work to be done, before i will be able to fire up that thing, in the car!!