68 Dimmer switch question (bypassing)

[Chargeraddict]

Hey guys, My dimmer wasnt allowing power to get to my fuse panel to light my cluster, so I cut the black, green(2 wires on bottom) and tan wire off the switch and connected them all together. The only wires I left on the switch are the yellow ones for the dome light, will this still activate the dome light? I figured it was just grounding the yellow wires. Was I right to attach those other 3 wires together? Thanks

[roger01]

all yours NACHO

[Nacho-RT74]

LOL... funny part of this is that I already had this diagram made LOL and I think in fact I made based on a 68 diagram.

All you need is jump this terminals on plug or directly at dimmer prongs.

yes, dome light will keep working.

Frequently, the dimmer porblems are just because the green stuff ( oxide/sulfated ) rehostat, what are more less easy to fix with patiente and propper products.

you didn't need to cut any wire AND EVEN LESS on headlight switch

[Chargeraddict]

Thanks Nacho,   I couldnt figure out how to make a jumper on the switch so I thought id just cut them and fasten them together with a proper connector. Everything seems to work ok, but im having dome light issues, i think somthing is wrong with the actual light tho.

[mopar0166]

by pass worked great for me, and i really didnt need it as a dimmer. 

[nascarxx29]

I by pass mine for 2 reasons its alot of work to changeout the roll switch.And you dont need to dim your dashlights they are never bright enough anyway.I went to 194 bulbs from the 158-s they originally had.