Vectors !!!!!

[knitz01]

I just bought a set of four vector wheels 2 are 15x8s with a 3.5 backspacing is it posible to run those on frt of a charger? and the rears are 15x10 with a 3.75 backspace I'm shure they would not work for the back of a charger. The price was right, so i bought anyway. By the way they are a 4.75 bolt pattern. can anyone give some good advice ie. make them work, or resell at what price? all are in good condition with bfgs on them.
thanks a head of time.

[terrible one]

 4.75" is a Chevrolet bolt pattern, you need 4.5" (or unilugs) to fit your Charger. The rears do not have enough backspace, and they will stick out past the fender. I think the fronts will probably be the same way. 

[bull]

I got a set of Ford/Mopar Vectors for $160 off craigslist; sat on them for a few months and sold them for $300. There were 2 15x10 and 2 15x7 and the 10s had the shallow backspacing too like yours so the guy that bought them just jacked the back of his Charger up and put the 10s on anyway.

But what do you do with a Chevy bolt pattern? Wheels aren't something I advise people to "make it work" so to speak.