News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

68 vacuum can attachment HELP

Started by fc7cuda, May 31, 2023, 05:23:38 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

fc7cuda

May 31, 2023, 05:23:38 PM
Hi,

I'm looking for a pic showing the correct bolt to mount the vacuum can under the battery tray.  I do not see it listed in the Dave Wise book.  Anyone happen to know???

Thanks

cdr

#1
June 02, 2023, 09:18:25 AM
Mine had the same screws that held the alignment access plates on in the inner wheel wells, hex head
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

Dino

#2
June 03, 2023, 02:28:37 PM
Do these help? 69 though.


Charger Engine Bay  Progress 004 copy.jpgBattery Tray & Vacuum Canister (1) copy.jpgBattery Tray & Vacuum Canister (2) copy.jpg   
Extraordinary claims require extraordinary evidence.
Print
Go Up Pages1
User actions