News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Mastercylinder questions

Started by Belgium R/T -68, May 24, 2009, 01:12:16 PM

Previous topic - Next topic

Belgium R/T -68

Should I use the plastic gasket between the mastercylinder and the brakebooster? Secondly, should the pin from the brakebooster be pressed in
by the nuts holding the mastercylinder? Otherwise I will not get it on.

Per
Charger -68 R/T 500 cui Stroker

John_Kunkel


Something is wrong there, the pushrod shouldn't be extended that far out of the booster with the brake pedal up. You want to use all of the original gaskets/spacers between the MC and the booster, otherwise the pushrod will prevent the rear piston in the MC from fully returning.
Pardon me but my karma just ran over your dogma.

Belgium R/T -68

OK, could it be that the rod is that far out because the pedal is not installed yet? :scratchchin:
Charger -68 R/T 500 cui Stroker