Anyone know where to get these?

[twinscrew698]

Just need the upper contol arm brackets for 68 B body?

I used someones pic to show what i need sorry!!

[UFO]

I will say the only place to them is cut them from another car.

[twinscrew698]

Yeah i think so too, hoping some one sells after market but not seen any!!

[mopar_nut_440_6]

Just need the upper contol arm brackets for 68 B body?

I used someones pic to show what i need sorry!!

I recognize that car!! No worries!

[twinscrew698]

Thanks glad you understand..That pic was the only one i seen that showed what we need!

[suntech]

Try to contact some of the guys that has the VX og Bill Reilly front suspention. They will take them off, to fit the new suspention.
Or maybe contact XV og Bill Reilly directly. They have installed a few, so they should have a few lying around

[NorwayCharger]

Try to contact some of the guys that has the VX og Bill Reilly front suspention. They will take them off, to fit the new suspention.
Or maybe contact XV og Bill Reilly directly. They have installed a few, so they should have a few lying around

The original upper contol arm brackets are used on the RMS (Bill Reilly) front suspension, i did anyway   

[twinscrew698]

Thanks will give em a try!!

[suntech]

Sorry Arne, i thought that was like it is on the XV. 

[lilwendal]

Just need the upper contol arm brackets for 68 B body?

I used someones pic to show what i need sorry!!

Damn...Just threw a set of shock towers with them attached away not 3 weeks ago.
I do have another set  thrown aside if you have no luck let me know and I'll take the plasma cutter to it.

[SFRT]

theres a set on egay right now

[twinscrew698]

lilwendal how much you want for both of those?

[twinscrew698]

SFRT you mean those from Mitchell? If so Thanks for the info but thats a lot more than i can afford!!

[lilwendal]

lilwendal how much you want for both of those?

Are you needing both sides?? When i get home I'll snap some pics and you can tell me exactly where you need them cut at.  I've got a plie of old sheetmetal I've been slowly cutting up and hauling out.  Wanted to post various little brackets or metal sections they don't repop for those that might need it. Just been busy.
Same as the random acts thread.  Just pay me back the shipping and I'm good. I'll be able to get them off this weekend....

[FJ5WING]

Anyone have any tricks for patching these in so the alignment is still possible? I may be needing to replace one side on my car and wondered how to get it located properly?

[lilwendal]

Well I never did throw the other set of frame rails with the towers out so I have 3 sets here with those upper control arm brackets.
I'd prefer to cut/ship the whole tower so you have all your reference points for  when you go to install it again. Just more to ship the tower as opposed to just the brackets.
If I cut the tower off flush at the top of the rail will that work for you?

[NorwayCharger]

Well I never did throw the other set of frame rails with the towers out so I have 3 sets here with those upper control arm brackets.
I'd prefer to cut/ship the whole tower so you have all your reference points for  when you go to install it again. Just more to ship the tower as opposed to just the brackets.
If I cut the tower off flush at the top of the rail will that work for you?

Maybe this helps.

[twinscrew698]

lilwendal that will be fine as the tower itself apears to be good its just those mounting brackets rusted...

[twinscrew698]

lilwendal sent you a PM..