Gasket between Gas cap trim ring and body paint?

[1969chargerrtse]

69 Charger Gas cap and trim ring gasket.  I can't find this item anywhere, I did email a place suggested any ideas otherwise?  Without this gasket the trim ring would be on your paint.      I even called Year One, no such animal.

[Back N Black]

If you buy the complete body gasket kit, it will be in the kit. I have not seen them sold separately

[69bronzeT5]

This it?

http://www.paddockparts.com/Paddock/product_family.asp?family%5Fid=12202&gift=False&0=dept%2Easp%2Cdept%5Fid%3D4%26menu%5Fid%3D%26Tree%3D%2CDodge%2FPlymouth&1=dept%2Easp%2Cdept%5Fid%3D60%26menu%5Fid%3D%26Tree%3D0%2CDodge%2FPlymouth%20Fuel&mscssid=11B6058C1BD74C369A42EFEDF560A6E3

[Hemidog]

Here's the gasket's that goes on both sides of the quarter:
http://cgi.ebay.com/ebaymotors/DMT-Mopar-Charger-68-69-70-Fuel-Filler-Gaskets-1968_W0QQcmdZViewItemQQ_trkparmsZ72Q3a570Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem3ca15fc21dQQitemZ260405445149QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

[1969chargerrtse]

Here's the gasket's that goes on both sides of the quarter:
http://cgi.ebay.com/ebaymotors/DMT-Mopar-Charger-68-69-70-Fuel-Filler-Gaskets-1968_W0QQcmdZViewItemQQ_trkparmsZ72Q3a570Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem3ca15fc21dQQitemZ260405445149QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Ahhhh that's the place Chris ( mod ) suggested.  I wrote them an email, and now I know the answer.  Thanks boys, I spent a long time trying to find that.
So the white foam piece lays under the trim ring and on the body paint?

[Just 6T9 CHGR]

Here's the gasket's that goes on both sides of the quarter:
http://cgi.ebay.com/ebaymotors/DMT-Mopar-Charger-68-69-70-Fuel-Filler-Gaskets-1968_W0QQcmdZViewItemQQ_trkparmsZ72Q3a570Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem3ca15fc21dQQitemZ260405445149QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Ahhhh that's the place Chris ( mod ) suggested.  I wrote them an email, and now I know the answer.  Thanks boys, I spent a long time trying to find that.
So the white foam piece lays under the trim ring and on the body paint?

read the auction under the "materials" section

PS---your searching skillz suck!  

[Shakey]

When I went to put mine on it made the trim ring / base sit too high so I ended up throwing it in the garbage.  I used a layer of masking tape on QTR.