Where should i buy exhuast from? EDIT is this a good x pipe?

[miller]

My 440 has been brought to life, but now it needs exhaust.

I am hoping to find cut outs followed by a x pipe and then ultra flows.

firefighter3931 found ultra flows at a very low price at summit, but were should i be looking to find a good quality but relatively inexpensive x pipe and cut outs?

[miller]

i found a universal x pipe with cut outs from summit, would this work on my 69 charger?

http://store.summitracing.com/partdetail.asp?autofilter=1&part=PYE-XVX10&N=700+4294923429+4294921571+4294908110+4294908099+115&autoview=sku

also these are the mufflers i plan on buying

http://store.summitracing.com/partdetail.asp?part=WLK-17219

is this a pretty good set up?

[firefighter3931]

Both of those are excellent choices for your car, inmo 



Ron

[miller]

I'm just unsure that the x pipe will work under the car (will it line up with the headman elite headers, will there be enough room to squeeze everything in, etc), do you know if the x pipe will have to be modified to fit?

[firefighter3931]

You won't know how well it fits until you try to install the x-pipe.....most universal type systems require some fabrication. The only "sure thing" is TTI headers coupled to TTI exhaust. Of course that is reflected in the price.


Ron

[miller]

The guy who wants to do the exhaust on the car says he doesn't have a mig welder and wants to stay away from any fabricating in the cut and reweld aspect.... so I thought that if I found a pre-made x pipe it would be done for him and all he would have to do is bend the rear pipes.... oh well back to the drawing board I guess...

[Rolling_Thunder]

The guy who wants to do the exhaust on the car says he doesn't have a mig welder and wants to stay away from any fabricating in the cut and reweld aspect.... so I thought that if I found a pre-made x pipe it would be done for him and all he would have to do is bend the rear pipes.... oh well back to the drawing board I guess...

Are you getting the work done for free ?  if not find someone else to do it...   anyone who does exhaust for a business should have a mig