News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Tranny dipstick tube bolt

Started by grdprx, April 18, 2009, 11:56:46 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

grdprx

April 18, 2009, 11:56:46 PM
Anyone know what size the bolt is that holds the tube to the transmission?  I got my tranny/engine in the car, and I can't figure out which bolt will fit and the length for it. 

Thanks!   :cheers:

1969chargerrtse

#1
April 19, 2009, 05:49:37 AM
On my 69 I thought it was the same size and length as the other trani to motor bolts?
This car was sold many years ago to somebody in Wisconsin. I now am retired and living in Florida.

68n70

#2
April 19, 2009, 07:16:42 AM
QuoteOn my 69 I thought it was the same size and length as the other trani to motor bolts?

Me too!

maxwellwedge

#3
April 19, 2009, 08:22:24 AM
Same size as the others on a big block auto for 100% sure.

John_Kunkel

#4
April 19, 2009, 06:05:37 PM

If you're talking about the one that holds the tube brace to the bellhousing it's 3/8"-16 X 1 1/4".

If it's the one that holds the tab on the bottom of the tube to the case it's 5/16"-18 X 1/2".
Pardon me but my karma just ran over your dogma.

grdprx

#5
April 19, 2009, 11:34:07 PM
Thank you gents!  I grabbed a bolt off my core tranny.  :2thumbs:
Print
Go Up Pages1
User actions