News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Anybody install Billstein Shocks on a 73 ? Did you need to do some "customizing"

Started by chargers_r_us, April 09, 2009, 06:47:08 PM

Previous topic - Next topic

chargers_r_us

I have ordered torsion bars from Firm Feel. I ordered the 1 1/8 bars , 43 1/2 long. I also ordered a set of Billsteins for the front, but the salesman just called and told me that I will need to make the opening in the LCA a bit larger to fit them in. I was just wondering if anybody else ran into this, and if it is best to go ahead with the Billsteins, or just go to KYB's. I was told that the KYB's do not fit snug either and would need some washers for spacers at the bottom. This is for a 1973 SE. Thanks again for any help on this one!