Local Sheet Metal in St Louis

[cudaken]

Been out of the Bodywork game for 8 years now? When I had a shop I use to buy Re-pop parts from St Louis auto panel, they are gone now from what I heard. I all so bought parts from Keystone for collision repair for customers cars.

After LKQ bought Keystone did they add Re-pop older car parts? I rather hand pick my sheet metal than have it shipped. Not all parts are created equal! 

Going to need a 1/4 panel for my 68 Road Runner.

Cuda Ken

[fy469rtse]

All the re-pop panels are getting better, you will still need to adjust to fit , but good quality , Amd stuff I have used and would not have been able to do car pictured above without , if all your doing is a quarter panel your luckier than most, thank god for all the sub structure parts that have come out, plenty of threads on here showing qtr.'s being replaced , have a look around lots of thread's with photo's , I just wish I had joined this site a long time ago, would have saved me a lot of grief .

[bull]

You can pretty much build a whole car now from AMD. When I bought my 68 10 years ago I think the only things you could get were partial quarters, sail panels, Dutchmans and valances.

[cudaken]

 
Is AMD based in St Louis? If not web link pleases.

Cuda Ken

[bull]

Is AMD based in St Louis? If not web link pleases.

Cuda Ken

AMD produces the stuff but there are typically local distributors or someone you can order through. Probably several in St. Louis. Or just order it off Ebay.

https://www.autometaldirect.com/

[moparstuart]

Been out of the Bodywork game for 8 years now? When I had a shop I use to buy Re-pop parts from St Louis auto panel, they are gone now from what I heard. I all so bought parts from Keystone for collision repair for customers cars.

After LKQ bought Keystone did they add Re-pop older car parts? I rather hand pick my sheet metal than have it shipped. Not all parts are created equal! 

Going to need a 1/4 panel for my 68 Road Runner.

Cuda Ken

keystone/ LKQ  also own goodmark for restorations parts , but AMD stuff is better

[cudaken]

 Thanks Stuart, I get a discount through work with LKG / Keystone. Do they have a link by chances?

I was impressed with the parts made by AMD! Hard to believe someone finally makes door for our cars. But, $700.00 is out of my prices range!

Later, Ken

[moparstuart]

Thanks Stuart, I get a discount through work with LKG / Keystone. Do they have a link by chances?

I was impressed with the parts made by AMD! Hard to believe someone finally makes door for our cars. But, $700.00 is out of my prices range!

Later, Ken

you just call and order the stuff from a salesmen at LKQ or you local aftermarket keystone  ?  around here they are all one call

[HOTROD]

We don't have anything any more thats why I wait for the mopar show at Gateway and don't pay the hundred dollar shipping per quarter panel !!!!