Holley 750 vacuum and Edelbrock Preformer 440

[Jesco]

Hi guys,
Can I hook up the original coil bracket with coil and run the carb with the 440-4 bbl throttle bracket with these parts. Will it work or must I modify... Pics??

I know that 1bad68 run his speed parts in a very clean way - stock looking!

Cheers

[Jesco]

Sorry, I'm sure that 1bad68 have a nice engine comparment but I did mean 1HOT68 - sorry again.

[Just 6T9 CHGR]

Im running an Edelbrock CH4B with a 750 Holley and run the coil in the stock location...I did have to make a bracket up though when I put in the drop base under my stock aircleaner...

Before I did that I had no trouble fitting it under the aircleaner

[Jesco]

Nice looking.  Do you use the original 440-4 bbl throttle cable bracket for your holley. Is it a double pumper or a vacuum?

[Just 6T9 CHGR]

Thanks
Yes its the orig cable bracket and its a vacuum secondary with a HP main body...since this pic I have put back on the kickdown linkage as well (even though I dont use it..I run a manual valvebody)

Below is another pic with the linkage on....

[Jesco]

Excellent! I am putting in a 440 magnum in my R/T soon instead of my 520 Indy six pack. I will run my 440 like yours with the same air cleaner and stuff. Do I need drop base with a regular performer 440?

[Just 6T9 CHGR]

No....not needed.  Should be able to clear the hood no problem..now it was the RPM intake I'd say definitely not

[Charger-Bodie]

Sorry to join in late....................Do you mean this old wreck?

[Back N Black]

Sorry to join in late....................Do you mean this old wreck?

That looks awesome, love how the black engine bay makes the engine stand out.

[Jesco]

Sorry to join in late....................Do you mean this old wreck?

Awesome! This is TTi:s isn't, 1 7/8"?
Thanks for pics 

[Charger-Bodie]

Sorry to join in late....................Do you mean this old wreck?

Awesome! This is TTi:s isn't, 1 7/8"?
Thanks for pics 

Yes TTi 1 7/8 Headers.....They are dark grey now to blend in a little more for the stock appearance.

[rusty70charger]

just wondering where you got the fuel lines on the red engine? thanks Rusty

[Charger-Bodie]

I know you were asking Chris about his "red" engines fuel lines,but mine came from the same place. Here ya go:

Fabulous Fabrications......303-666-9882 Ask for Greg. ....He does a great job and is very reasonable.

[Jesco]

Thanks
Yes its the orig cable bracket and its a vacuum secondary with a HP main body...since this pic I have put back on the kickdown linkage as well (even though I dont use it..I run a manual valvebody)

Below is another pic with the linkage on....

Hi again,
Do you use the holley 20-7 adapter, cant tell bye looking at the pictures? And have you done the plumbing for the carb (fuel lines) yourself or is it stock parts... Need the same for my charger (440 with holley 750 vacuum).

Thanks!

[Just 6T9 CHGR]

Yes I used the Chrysler linkage adapter 20-7...

If you look at 1hot68's post above yours, you will see where I got my lines....

PS---the engine is orange!

[Jesco]

Thanks. Is it stock fuel line from the fuel filter up to the T-fitting/adaptor?