73 charger leaf springs

[FLG]

Howdy,

Just want to know what i need to replace my leaf springs?

I want to replace the springs, and everything else that would be replaced with them. Can someone please give me a list and if possible a place that sells all the parts or just a kit with everything?

My rear hanger snapped last night so i just want to get her on the road a bit longer, figure im going to need new ones when i restore it anyways.

Thanks,

Frank

[defiance]

I posted THEN realized the '73 has all that isolated stuff and may be different from the '72.  Sorry!  I won't delete my post in case it's the same, but this is probably wrong

Assuming front spring hangar is in good shape...

-Leaf springs (duh )

-front spring bushings (2) (2" press fit if they're like mine, I think some springs have 1.5" though).

-rear spring bushings (total of 4 sets - 1 set into each spring, one set into each frame rail.  The sets usually include 2 rubber pieces and a metal sleeve.  So total would be 4 metal sleeves and 8 rubber boots).

-new u-bolts (4) (These things seem to NEVER come off without breaking/twisting )

[bordin34]

I think Charger1973 converted his 73 to a 72 style rear by taking all the parts off of a 72 and moving them over.

[FLG]

Thanks Defiance 

Nacho has exchanged many pm's with me and i was able to locate the isolator pads and the rest of the parts. I am still searching for a pair of front hangers though.

Bordin, PST sells new isolator pads.

Im just going to go to a local spring shop and have him make me springs, i dont want to worry about my ride height if i buy aftermarket springs. If i go there he will be able to add or remove leafs to get the height i want.

[defiance]

You looking for stock style '72 front spring hangars?  I swapped mine out for a relocated (inboard) set, so my stock set is sitting on a shelf at home.  Pay shipping and I'll give them a quick cleanup and send them your way.  PM me or email me ( defiancecp @ gmail . com ) if you want 'em.

[Charger1973]

I think Charger1973 converted his 73 to a 72 style rear by taking all the parts off of a 72 and moving them over.

Yep, I used the entire setup from under a junked 72 Rallye and got rid of all the rubber isolation stuff in the back of my car.

[FLG]

Thanks!

Just want to verify they will work. Im not sure if the hangers are different, though they should be the same.

charger1973, i will take a look at my stuff but most likely will keep the isolators for now.