how fast would this combo be? (roughly)

[Bandit72]

ok starters..full body 72 Dodge Charger, Mini Tubbed, Fuel Cell and Battery in trunk fiberglass hood...

451 stroker.
4340 Chromoly Steel Connecting Rods
forged pistons (hoping for 10.5-1 compression ratio but could vary)
.507(intake) .510(exhaust) lift cam (comp cams CRB XE284J-10)
single plane edelbrock intake
demon carb (around 750 cfm)
eddy heads w/mild port work & 3 angle valve job
windage tray
electric water pump
everything nice and balanced
3.91 sure grip rearend
widest tires i can get by relocating the springs and mini-tubbing....

if i'm missing anything just let me know....thanks

later 

[700HPCharger]

Have you got accurate weight of the car?

[Chryco Psycho]

which Eddy intake ?

[firefighter3931]

Depends on the cars weight and how well it hooks up. You didn't say how much stall but with that cam you'd want around 3500 rpm for best track performance. That combo should push the car into the low 12 - high 11 second range. A solid flat tappet cam would be a better choice inmo. Those heads breathe good all the way to .600 lift so you want to take advantage of that when choosing the cam. 

Ron

[Bandit72]

it will weigh about the same as a stock 72 charger..except with fiberglass hood. as for stall, i was planning on around 3000 stall

thanks everyone

later