Steering Column Shifter Linkage Grommet

[The70RT]

 I need the part that is on the bottom of the column tube on the shifter arm bracket. It is a rubber grommet with metal center where the rod hooks up to it. Does anyone make it? Thanks.

[A383Wing]

[The70RT]

Ok.........here it is.

[A383Wing]

OK..I'll look this weekend...I got a couple of "A" body columns out there.....unless somebody beats me to it

[The70RT]

OK..I'll look this weekend...I got a couple of "A" body columns out there.....unless somebody beats me to it

Thanks. I checked a ton of web sites and didn't see any. As you can see the hole is elongated some. I figured it would be reproduced by someone by now.

[GreenMachine]

If you can't find one, I'm pretty sure the plastic shifter linkage bushings are direct replacements.

[John_Kunkel]

To my knowledge nobody makes a replacement and the plastic bushings are a different size.

You can use a standard rubber grommet of the correct size and press in a steel sleeve of the correct diameter and length.

[A383Wing]

OK...I went out tonight and dug out my "A" body steering column....in there is a rubber grommet, not plastic, that is in perfect condition....I don't have the metal center, you still want it?

Send me name & mailing info in a PM and I will get it out to you tomorrow.

[The70RT]

Sent ya a PM. Thanks.

[gtx6970]

Not being reproduced and both the insulator and the steel inner sleeve are NS1 from Mopar. I ck'd on these about 2 months ago and several dealers around the country showed them on the locator

[A383Wing]

I mailed out the rubber grommet to him today...I did not have the steel sleeve insert

[GreenMachine]

I was at the junkyard today and picked up a couple, they appear to be made of bronze. Let me know if you still need them.

[The70RT]

I was at the junkyard today and picked up a couple, they appear to be made of bronze. Let me know if you still need them.

Thanks buddy but A383 Wing hooked me up