Progress Being Made

[jdiesel33]

Getting ready to pull the fenders and pull the engine. Got the hood, grill, valence, condenser, and radiator off tonight. That is probably child's play to most of you advanced folks, but I have never done all of that before. Small sense of accomplishment and one step in a journey of 1,000,000,000,000,000 steps. Anyway, just wanted to share.....I'll keep on keepin' on.

[Silver R/T]

don't stop now, keep working. Once you stop you tend to want to do other things

[tan top]

  good stuff   keep the pictures coming  don't for get to label & tag all screws nuts bolts , even if you are going to get new stuff  ..take lots of pictures on how things come apart & draw diagrams if need be .. one that comes to mind is the rear window regulator/winder &  associated hardware      

[jdiesel33]

good stuff   keep the pictures coming  don't for get to label & tag all screws nuts bolts , even if you are going to get new stuff  ..take lots of pictures on how things come apart & draw diagrams if need be .. one that comes to mind is the rear window regulator/winder &  associated hardware      

Yes indeed. I am bagging all hardware and TRYING to take a lot of pics. I was a terrible note taker in school b/c I would not write down a lot of stuff that I either didnt think was important or thought I would remember. I am trying to fight those natural urges while doing this. I think I have missed a things already, but hopefully not much. I guess I'll find out when I go and put everything back together. Not looking forward to the window stuff!!!

[69*F5*SE]

good stuff   keep the pictures coming  don't for get to label & tag all screws nuts bolts , even if you are going to get new stuff  ..take lots of pictures on how things come apart & draw diagrams if need be .. one that comes to mind is the rear window regulator/winder &  associated hardware      

[jaak]

good stuff   keep the pictures coming  don't for get to label & tag all screws nuts bolts , even if you are going to get new stuff  ..take lots of pictures on how things come apart & draw diagrams if need be .. one that comes to mind is the rear window regulator/winder &  associated hardware      

Yeah that rear reg, is a bee-yatch! You pretty much got to disassemble it inside the quarterpanel then pull the parts out through the openings.

Jason

[1969chargerrtse]

Cool pictures, looking forward to many more. 

[Shakey]

Take as many photos of you can before removing a part and then more of the part once you have removed it.

Keep the parts together and store them in one area of the garage so that you know where to find them when it comes time to install them.

Keep on working and posting progress photos.

[mopar0166]

keep motivated, mine has taken alot longer then i had hoped but my goal is to have in OC, MD in may so i have had little to do other then work on my car.    good luck !

[tan top]

good stuff   keep the pictures coming  don't for get to label & tag all screws nuts bolts , even if you are going to get new stuff  ..take lots of pictures on how things come apart & draw diagrams if need be .. one that comes to mind is the rear window regulator/winder &  associated hardware      

yep ..when i took mine apart looked at the rear window winder set up & thought  OH no  there is no way i'm going to remember that in 3- 4-5  years time when i put it back togeather
  so what i done is , drew around the bolts & numbered them , cut up a cardboard box & marked out where the bolts went & numbered them the same , & made holes , & after i removed the from the car , one at a time , re assembled &  bolted them  back up on the carboard ,  , just be carefull when storing them you done put any stress on the nylon rollers , best to stand the lot  up ,  against a wll or something , same position as they are in  the car .

[jdiesel33]

good stuff   keep the pictures coming  don't for get to label & tag all screws nuts bolts , even if you are going to get new stuff  ..take lots of pictures on how things come apart & draw diagrams if need be .. one that comes to mind is the rear window regulator/winder &  associated hardware      

Now that's a smart idea.

yep ..when i took mine apart looked at the rear window winder set up & thought  OH no  there is no way i'm going to remember that in 3- 4-5  years time when i put it back togeather
  so what i done is , drew around the bolts & numbered them , cut up a cardboard box & marked out where the bolts went & numbered them the same , & made holes , & after i removed the from the car , one at a time , re assembled &  bolted them  back up on the carboard ,  , just be carefull when storing them you done put any stress on the nylon rollers , best to stand the up , up against a wll or something , same possion as they are in  the car .

[tan top]

 thought i had a picture saved of the regulators on the cardboard also 

[400/6/PAC]

Looking good.
Keep up the good work.

[jdiesel33]

Took off the Fenders last night. Easier than I thought it would be. I do have one thing to say that I am sure lots of you have either said or thought before.....F*!# that bolt on the passenger side up in the corner by the antenna!!!!!