couple of dumb questions

[chargerkid01]

Bought a complete new battery tray ( everything to assemble it). How does it all go together?? Mine didn't come with one!! Post pics

Next question I finally got a vacum canister I know it goes under the battery tray but whta holes does it bolt to?? Pics please!!

Incase you think me asking for pics is weird I'm a visual learner and not a very good reader!!!

[Chatt69chgr]

Not sure where you got the vacuum canister but the correct one looks like a big tomato can and has a flat piece of steel crimped to the ends of the can.  The flat steel extends out past each end of the can and it attaches to the frame rail directly below the battery tray.  I think mine used sheet metal screws.  The battery tray is just a formed flat piece with edges that curve up all the way around about a 1/2 inch.  there are two supports that go on the underside and attach to the innner fender panel.  As I recall, there is one upper strut.  I think it was at the front end and it went upward.  I don't remember if it attached flat to the inner fender panel or wrapped around to the top surface of same.  I'am sorry but I don't have any of the pictures you want but it's really very straight forward.  I'am sure someone will supply pictures.  Good luck.

[chargerkid01]

the bottom tab on my canister doesnt stick out!! I got it on ebay!! It has 2 little bolts under the can on the strip. As for the battery tray I was wondering how it all went together.

[tan top]

took these pictures earlier , was in a bit of a rush ! if these are no good to you & your still stuck , i'll wip the battery out & tray & i'll  take some better pictures

[chargerkid01]

pics are perfect thank you so much!!!

[tan top]

  no problem