74-74 Headers on a 440

[Moparbob]

Yo Peeps 

Ok heres what I got:

73 Rallye
440
727

I have a set of hooker racing headers and while they fit the collectors are 3 1/2" giving me clearance issues on my low rider. I guess I have about 6" but haven't measured them. Plus the collectors are right at the cross member with no clearance whats so ever.

Does anyone have a set of headers for these cars that fit nice and allow a good clean installation? Pica would help too 

[flyinlow]

Six inches of ground clearence on long tube headers is not bad.

3 1/2 inch collectors probably have 2 inch primarys. If I remember your build 440 9.0 CR ,stock heads, lunati 60302 Cam?

Those would seam to be pretty large for that set up. Would lose bottom/ midrange torque. 

craig