Dana 60 Numbers

[ChargerSG]

Been thinking in buying a Dana for my 69 RT/SE(since its missing), looked at this Dana with numbers:
12   7  7 B,  Center to Center of spring perches is 44 inches, 11    30   7B1, 602957   2,  Back end to Back end plate is 53 1/4 inches. The guy thinks is a 68-69 B-body rear, anyone who can tell what this Dana is for?

[RD]

the perch dimensions are for a 66-70 b body, but the 53.25" dimension is for an A-Body

see: www.moparts.org/Tech/Archive/axle/17.html

[ChargerSG]

Thanks for the info, have the guy written wrong numbers or have someone hotroded that rearend

[ChargerSG]

Got more numbers from the guy. The numbers on Ring gear are.10 10 67, 32503 A3R30, 46-13, Numbers on POSI=25124X 11 20 67A, Bearing Caps=C80257. Dont know anything about this so help i appriated.

[John_Kunkel]

602957-2 is from a 68-69 B body with 3.54 gears. The late '67 stampings make it a '68 model year unit, it should still have a drain plug.

Measuring between the backing plates can be deceptive, measuring across the flanges of the housing itself is the only way to determine if it's still stock width.

More info:

http://www.autohobbydigest.com/dana.html

[ChargerSG]

Thanks for the info

[ChargerSG]

Here are some pictures of it, not the best but anyway