News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

trunk floor drain hole size question

Started by resq302, March 11, 2009, 11:09:04 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

resq302

March 11, 2009, 11:09:04 AM
Ok, since dad and I are presently working on the trunk section of our 70 chally vert, we noticed that the floor did not have the drain holes cut out when the previous owner had the trunk floor replaced.  We have a general location of where all the holes go, but we do not know what the hole saw size that we need should be.

Can anyone help us with some measurements?

Thanks,

Brian
Brian
1969 Dodge Charger (factory 4 speed, H code 383 engine,  AACA Senior winner, 2008 Concours d'Elegance participant, 2009 Concours d'Elegance award winner)
1970 Challenger Convert. factory #'s matching red inter. w/ white body.  318 car built 9/28/69 (AACA Senior winner)
1969 Plymough GTX convertible - original sheet metal, #'s matching drivetrain, T3 Honey Bronze, 1 of 701 produced, 1 of 362 with 440 4 bbl - auto
Print
Go Up Pages1
User actions