73 Charger Front End Rebuild

[bordin34]

Does this list look right for the rebuild of my Chargers front end?
2-Tie-Rod Adjusting Sleeve     Moog ES440S          C-Body Part
2-Inner Tie-Rod End              Spicer 4011049        C-Body
2-Outer Tie-Rod End              Spicer 4011047       C-Body

2-Upper Ball Joints                Moog K7262N         Threaded
2-Lower Ball Joints                Moog K719            Threaded
4-Cam Bolts                        Spicer 6161013
1-Pitman Arm                      Spicer 4501028
1-Idler Arm                         Spicer 4501032
2-LCA Bushings                    Spicer 5651028     Rubber, just in case I mess up the sleeve in the arm currently

Just Suspension
Poly Strut Rod Bushings
Poly Control Arm Bushings LCA's and UCA's  LCA's have no sleeve.

Does this seem complete?
Dan

[RD]

missing bushings for upper control arms and the bumper stops for each upper control arm and lower control arm

i believe the upper ball joints are threaded too.  when i replaced mine on my 73 they were threaded, and i replaced them with threaded ball joints.

dont forget front sway bar stuff too, that is if ya wanna get technical w/front suspension rebuild.

[bordin34]

The Just Suspension Bushing kit includes both UCA's and LCA's. I am planning on reusing my bump stops unless that could pose a problem. Also, the sway bar is new as are the bushings.