News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Head install?

Started by terrible one, January 24, 2009, 10:14:50 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

terrible one

January 24, 2009, 10:14:50 AM

Just want to make sure I didn't screw up this simple procedure.

I just put my heads back on my engine with the MP steel shim gaskets and some copper gasket sealer. I put a bit of oil on the threads of all of the bolts, but I suppose it was too much. After going through the torque procedure on the heads I noticed a bit of oil seeping under the head gasket. It wasn't some continuous flow or anything . . . I wiped the excess off and that was it. But did I mess something up? Or am I just paranoid?

firefighter3931

#1
January 24, 2009, 11:27:18 AM
No worries....it's fine.  ;)



Ron
68 Charger R/T "Black Pig" Street/Strip bruiser, 70 Charger R/T 440-6bbl Cruiser. Firecore ignition  authorized dealer ; contact me with your needs

terrible one

#2
January 24, 2009, 12:06:57 PM
Quote from: firefighter3931 on January 24, 2009, 11:27:18 AM
No worries....it's fine.  ;)



Ron

And again, thanks for the peace of mind Ron! Time to put the rest of it together!  :2thumbs:
Print
Go Up Pages1
User actions