News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Garage pics/ideas

Started by Chargerfreak, December 18, 2008, 01:34:38 AM

Previous topic - Next topic

Chargerfreak

Hello there,

Ihave a new garage to fill,
I'd like to see pics or hear ideas from what you guys have, the garage is about 10metersx5meters
(11 yardsx 6yards right)

Greets,
Chris.

69bronzeT5

Feature Editor for Mopar Connection Magazine
http://moparconnectionmagazine.com/



1969 Charger: T5 Copper 383 Automatic
1970 Challenger R/T: FC7 Plum Crazy 440 Automatic
1970 GTO: Black 400 Ram Air III 4-Speed
1971 Charger Super Bee: GY3 Citron Yella 440 4-Speed
1972 Charger: FE5 Red 360 Automatic
1973 Charger Rallye: FY1 Top Banana 440 Automatic
1973 Plymouth Road Runner: FE5 Red 440 Automatic
1973 Plymouth Duster: FC7 Plum Crazy 318 Automatic

Arizona Dave

I have a 2 car garage that is packed to gills with a Charger, Crarger parts, tools too numerous to ever use, other car parts from projects I no longer have or projects I don't own yet, beer fridge, tool boxes and quite a bit that falls into the "general crap" catagory.  Like any car guy, I jsut can't throw anything away because I might need it.  I wish i had your problem.  What I need to do is pull it all out, scrub top to bottom, repaint and and start anew.  What I really need is a barn.  Have fun building new workbenches and hanging signs Chris.   :2thumbs:
High Speed & Low Drag, Baby!
Look me up when you're in AZ.
Arizona Dave

FJMG

     Just a few basic notes, anything that touches the floor should be on casters, larger tool stands, larger parts supported by cradles w/casters (cradles can be simple pieces if plywood and/or lumber). If the workbench is not portable then fasten to the wall to keep the floor clear. This way cleaning up is easy, have you ever dropped a small item behind something heavy stacked on the floor against the wall? Start shelving anywhere from 30"-40" off the floor and go to ceiling (just buy a small step ladder and hang out of the way), this way when you have free floor space to store (again a cradle w/casters) something heavy that you remove from the car (or buy at a swap meet).
     Your garage is not huge so you will have to be efficient with your use of space.

A383Wing

I'll try and remember to post pics tonight

PocketThunder

Quote from: FJMG on December 18, 2008, 08:44:01 AM
     Just a few basic notes, anything that touches the floor should be on casters, larger tool stands, larger parts supported by cradles w/casters (cradles can be simple pieces if plywood and/or lumber). If the workbench is not portable then fasten to the wall to keep the floor clear. This way cleaning up is easy, have you ever dropped a small item behind something heavy stacked on the floor against the wall? Start shelving anywhere from 30"-40" off the floor and go to ceiling (just buy a small step ladder and hang out of the way), this way when you have free floor space to store (again a cradle w/casters) something heavy that you remove from the car (or buy at a swap meet).
     Your garage is not huge so you will have to be efficient with your use of space.

:iagree:  Build shelves everywhere!  Take advantage of every cubic meter of space that you have.  In my old garage i built a row of shelves all the way around the top of the wall on all 3 sides and when i got done i put things away and the shelves were full an hour later...  :brickwall:
"Liberalism is a disease that attacks one's ability to understand logic. Extreme manifestations include the willingness to continue down a path of self destruction, based solely on a delusional belief in a failed ideology."

BigBlockSam

I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img

75dartsport

well this is mine bit basic i know but its home sweet home his new place when i move in is about 6 times the size with electric heating toilet etc


Charger_Fan


The Aquamax...yes, this bike spent 2 nights underwater one weekend. (Not my doing), but it gained the name, and has since become pseudo-famous. :)

75dartsport

haha that is a great example for the need of ,,,,, and ...... etc lol :eyes:

Sublime/Sixpack

I hope the heating element in that toilet seat is low voltage, or atleast is on a GFI circuit.   :D
1970 Sublime R/T, 440 Six Pack, Four speed, Super Track Pak

BlueSS454

Mine is 30 x 40 x 12.  I have 2 rows of 8 foot double bulb lamps with cold start ballasts.  I have 2 rows of shelves up along the back wall and need to add more.  I have all my toolboxes and shop equipment along the back wall and 1 side wall.  The only thing I plan on adding this winter is a 4 post lift.



Tom Rightler

Chargerfreak

Thanks guys, some very good ideas, specially the heated toilet lol!!

Any more input?

Chris

oldcarnut

If you decide to put up shelves, make sure they are supported and mounted good.  I have a couple of friends that put up some only to have the trophies or parts fall and put dents and scratches on their cars.  Looked good when they were installed but pulled out over time.  I guess the tendency to over load them takes over when space gets tight.

Dans 68

1973 SE 400 727  1 of 19,645                                        1968 383 4bbl 4spds  2 of 259

DSO_318

For me, I have a bunch of leter sized, and 4x6 card file cabinets. Each drawer has a label and systems are grouped together. Drawer organizers help too. I bought used & abused cabinets at thrift shops, garage sales etc. Backed against a wall the cabinet drawers pull open to the walkway. Rubbermaid storage or stackable tubs with lids are good for bulky items. Be careful as bigger ones tend to get overloaded. 

A383Wing


Finn

One of my friend's garages, or as I like to call it, time capsules:


His gas station he had moved from somewhere in Bakersfield I believed:


1968 Dodge Charger 440, EFI, AirRide suspension
1970 Dodge Challenger RT/SE 383 magnum
1963 Plymouth Savoy 225 with a 3 on the tree.
2002 Dodge Ram 5.9L 360
2014 Dodge Dart 2.4L

Arizona Dave

Quote from: Finn on December 21, 2008, 03:56:41 PM
One of my friend's garages, or as I like to call it, time capsules:


His gas station he had moved from somewhere in Bakersfield I believed:




This is totally Cool.  The cars all match the setup perfecty.  These shots give me inspiration to clean up my yard.  My place looks more like a salvage yard now.  I live in the AZ desert and the landscape looks a lot like my property.  You mentioned CA, so this must be in CA then(?).
High Speed & Low Drag, Baby!
Look me up when you're in AZ.
Arizona Dave

Finn

Yup, borderline desert area of socal lol. Ill try and remember to post up more pics of the rest of his place tonight, gotta eat dinner then change the rear brakes on my mom's car. You guys wouldn't believe some of the stuff he has, it's really amazing. You can barely see the blue and orange from a GT40 in the first pic, far right side.
1968 Dodge Charger 440, EFI, AirRide suspension
1970 Dodge Challenger RT/SE 383 magnum
1963 Plymouth Savoy 225 with a 3 on the tree.
2002 Dodge Ram 5.9L 360
2014 Dodge Dart 2.4L

BROCK

Forklift rack is arguably the most versatile shelving option there is!

=============================================
Let your music be in transit to the world

PocketThunder

Quote from: A383Wing on December 21, 2008, 02:10:41 PM
Well, here is my mess....

Hey you dont happen to have a spare 1st gen charger dash laying around do you?..??...   :shruggy:       :icon_smile_big:  :icon_smile_big:
"Liberalism is a disease that attacks one's ability to understand logic. Extreme manifestations include the willingness to continue down a path of self destruction, based solely on a delusional belief in a failed ideology."

75dartsport

i have decided sir that your garage is too nice to be yours it now belongs to me please pack it up and send to me asap [along with contents]

lol sorry but thats is such a sweet pad


Quote from: BlueSS454 on December 18, 2008, 11:37:17 PM
Mine is 30 x 40 x 12.  I have 2 rows of 8 foot double bulb lamps with cold start ballasts.  I have 2 rows of shelves up along the back wall and need to add more.  I have all my toolboxes and shop equipment along the back wall and 1 side wall.  The only thing I plan on adding this winter is a 4 post lift.





R2


75dartsport

r2 that is sooo cool about the nicest pair of butts ive ever seen  :icon_smile_tongue: