C500/Daytona headliner screws

[Paul 500]

I'm finally getting the headliner put in my C500, i know where 4 of these headliner hold down screws go but i cant find where the other 2 go. 2 go on the package tray shelf & the other 2 go where the old window would have been. Any ideas or pics.

[hemigeno]

Here's what I found in some old picture files... I marked the spot where the three screws go on each side - you should find screw holes already in your frame and package tray in these approximate locations.

Hope this helps,

Geno

[Paul 500]

Mine & my friends 500 only have 2 holes each side

[moparstuart]

I dont know if these help but here is the only shots i have of my rear window area . 

[Paul 500]

Another question, on my new headliner theres no slots for the short rear bows (havent got them anyway) i take it 500's & daytona's didnt use these as they had the screws to put it tight.
Thanks moparstuart the more pics the better.

[PocketThunder]

Do these help?

[Paul 500]

Also heres the corner piece  with the screws in, i know the originals were chrome (one being used with a washer to hold headliner down in first pic i posted) Did creative just use whatever they had lying around when they put the trim back in.