Snap-On box drawer removal

[hemi68charger]

Hey gang.
I was given this Snap-on box. The bottom has a dent in it and thus one of the casters don't sit flush. How in the world do I take the drawers out so I can straighten the bottom..

Thanks..

Opppsssss.. A photo I forgot.............

[The70RT]

Hey gang.
I was given this Snap-on box. The bottom has a dent in it and thus one of the casters don't sit flush. How in the world do I take the drawers out so I can straighten the bottom..

Thanks..

Should be some clips on the slide rails like most others?

[moparstuart]

picture?     might help us ,

[hemi68charger]

picture?     might help us ,

See above...........

[The70RT]

picture?     might help us ,

See above...........

Right at the end by the rivet is a clip. Use a screwdriver and release it from the rail.

[Blue Pentastar]

Snap on boxes are designed with a tool to remove the boxes but basically you slide a thin piece of metal inbetween the track sections push in on the drawer and then  pull back out. I wish I was home I would take a pic of what i am talking about.

Mike Schrader

[Just 6T9 CHGR]

Damn Troy, you're assembling a 68 Hemi Charger....surely you can figure this out

[moparstuart]

Damn Troy, you're assembling a 68 Hemi Charger....surely you can figure this out

[hemi68charger]

Damn Troy, you're assembling a 68 Hemi Charger....surely you can figure this out

With a little help............ If I've taught myself one thing regardling life, it's to ask questions.. The stress level stays way down......... After it wasn't obvious, I figured I'd ask a question or two before I headed home for the day to begin tinkering with it.. Low-n-behold, I got some feedback from here and moparts.. Soooooo, last night, I zeroed in what others had suggested and voila !!!!!

Soooooooooooooooo, in a round-about way, I figured it out.... 

Now, back to the '68.........................

[The70RT]

Damn Troy, you're assembling a 68 Hemi Charger....surely you can figure this out

With a little help............ If I've taught myself one thing regardling life, it's to ask questions.. The stress level stays way down......... After it wasn't obvious, I figured I'd ask a question or two before I I headed home for the day to begin tinkering with it.. Low-n-behold, I got some feedback from here and moparts.. Soooooo, last night, I zeroed in what others had suggested and voila !!!!!

Soooooooooooooooo, in a round-about way, I figured it out.... 

Now, back to the '68.........................

I hear ya. I have hesitated and did a search on some things instead of asking. Sometimes it is quicker to ask then searching through countless threads. I figure this is a place with a wealth of info so you might as well take a  once in a while if it benefits you.