Accessory Light and Map Light Harnesses

[BlueSS454]

I tried to follow this in the 69 Service Manual but I'm kind of at aloss here as to how these 2 connect.  First thing I am pretty sure of is you need to have 2 door jamb switches with dual male terminals for this to work.  The thing that is stumping me at the moment is, the color codes on the wiring diagram vs. what I have on the harness  don't seem to jive.  I have a pink lead that goes somewhere on the back of the fuse block, but I'm not sure where.  The diagram says it should be orange.  Do any of you guys with 69's have this harness out of the car to take a pic of it for me?  THere is also one wire on the map light harness that seems to be out of the terminal end, it's pink, the other 2 are yellow.  It also seems I'm missing the glove box light all together.

Edit:

Good news is I got the wiring for the blower motor and A/C compressor figured out 

[mopar0166]

I noticed while trouble shooting my Ignition light that there was some of the issues you speak of

first is that the ignition light and map light is connected by a time delay or a relay of some sort.  both run off the same feed

the lights for the lght pack run off a 3 prong female connection that gets its feed from the orange wire and dash lights and dimmer switch.  this should power the a/c lights and ashtray lights

Im not sure on the glove box, I didnt have all the parts for it so it was removed.   


Not sure if it helps at all but that is what i have found and i used the 1969 cornet accesory to figure this out becuase i couldnt find anything for my charger.

[Sweet T]

Pink wire is for the glovebox light...at least it is on mine and comes right out of the fuse box.  It should have a small connector on it.  The switch is placed on the right side of the glovebox.