I BOUGHT a C500 it's the find of my life time, barn find

[moparstuart]

I'll give ya $20 to get started on it now Stuart. That should get ya about half a tank to go back and look at it right?

I did spend the money for the a -piilars moldings and wayne gave me two standard charger rear back glass moldings to modify. I should have another set of back glass molding off the dayclona project when the vega hatch gets installed . But that blew the budget for the 500 this year .  Core Bucket seats are my next quest for it   Oh and an XX 440 block   LOL

[moparstuart]

 the cars namesake 

[tan top]

the cars namesake 

lovely looking cat 

[WingCharger]

He thinkin, "When is my Charger going to be done?"

[A383Wing]

At the rate Stuart is going....might take all 9 lives of the cat to complete it   

[moparstuart]

At the rate Stuart is going....might take all 9 lives of the cat to complete it   

still working the bug out on this beast , then I will finish the daytona clone before starting another project

[mauve66]

moparstuart, is that truck stop on I70 between the 55 and 75 mile marker on the north side of the highway??  In the GREAT STATE OF MISSOURI of course...........
i'm from the Blackburn/Marshall area (HWY 65 and 20) i've seen that sign somewhere there, haven't been home in years though, i  miss it..............
anyway, if it is where i think it is, if you can look around some more, back in the late 90's there was a yellow Superbird parked there several times a week.........................

truck stop was many pages and days ago, hope you understand what i mean................

[moparstuart]

 truck stop is on 29 between kc and st joe  ,   My salvage yard is 30 minutes from marshall we deliver to marshall a couple time s a week .

[mauve66]

on the west side of marshall there is a farm with quite a few old cars out in the trees but he wont sell to anybody, hard to see whats there in the trees, their all sinking into the ground
sorry about the truck stop, i thought there was one with that FARRIS sign out on 70 between marshall junction and higginsville

[moparstuart]

on the west side of marshall there is a farm with quite a few old cars out in the trees but he wont sell to anybody, hard to see whats there in the trees, their all sinking into the ground
sorry about the truck stop, i thought there was one with that FARRIS sign out on 70 between marshall junction and higginsville

nuelle's 4x4 salvage at higginville has a 4x4 truck up on a post ?

[mauve66]

i've seen it, been in Nevada almost 11 years now, used to run around Higginsville, Concordia, alma and marshall as a kid, the place i always saw the bird at was alot closer to sweet springs if i remember right, but anyway it was a long time ago

[moparstuart]

 HELP   Ok i need you guys with the numbers books help ?


   would this radiator my buddy has be the correct radiator number for my 500,  ? it has a 22 inch smaller opening and is a 440 auto  non a/c car  ?


my buddys story .
       I have a ton of parts in my garage that I just have to move. One piece is the 22" radiator that was in my RR with the 383. It is a good radiator and ran very cool, in fact the engine ran too cool with a 160º F thermostat. I want to put it up for sale but I have no idea of it's value, the PN is 2949053. That's a 1969 22" big block radiator. I wondered if any of you guys had any idea about what it is worth.

[Dans 68]

HELP   Ok i need you guys with the numbers books help ?


   would this radiator my buddy has be the correct radiator number for my 500,  ? it has a 22 inch smaller opening and is a 440 auto  non a/c car  ?


my buddys story .
       I have a ton of parts in my garage that I just have to move. One piece is the 22" radiator that was in my RR with the 383. It is a good radiator and ran very cool, in fact the engine ran too cool with a 160º F thermostat. I want to put it up for sale but I have no idea of it's value, the PN is 2949053. That's a 1969 22" big block radiator. I wondered if any of you guys had any idea about what it is worth.

Yes (I think so  )    . The 2949053 radiator was used with all non-A/C 383 engines, and all 440 auto non-A/C (and non Max Cool option) engines (while the Daytona and 6-pak engines used 2949055, and the Hemi 2949054). Tony's website has them for $345 (assuming a core rebuild will be needed) so if it a good operating radiator $400 would be a great price.    I have one of those radiators salted away in my garage that was on my Father-in-laws Super Bee. 

Dan

[moparstuart]

thanks dan

[moparstuart]

 pictures taken yeasterday  some minor rust but very clean for its age

[moparstuart]

 

[moparstuart]

  the second picture u can see wayne talledega sitting next to it

[moparstuart]

 

[XS29LA47V21]

    

[BigBlockSam]

thank god you got a decent body . cause man there's a lot of work to be done but i know you'll get it done Stu . 

[moparstuart]

thank god you got a decent body . cause man there's a lot of work to be done but i know you'll get it done Stu . 

i know you want my body , but you dont have to keep texting me that every night  . 

[BigBlockSam]

can't help it i'm a chubby chaser 

[pettybird]

[A383Wing]

I feel a great disturbance in the Force

[tan top]

pictures taken yeasterday  some minor rust but very clean for its age

         i spy pedal dress up ,