stock and performer intakes

[Nacho-RT74]

really worths the change ?

stock 400 iron intake againts edelbrock performer intake ? ( not the RPM model, I mean the basic performer ).

when I'm saying if really worths I means IF REEEAAAAALLY worths the change, being at least noticeable and not just for the weight diff

[frederick]

Hi,

I think this has been discussed before and the vedict was it doesn't make any difference to a stock intake.
If height is the problem, you're better of with an edelbrock DP4B(only available second hand) or a weiand action plus.

Hot Rod has tested a series of mopar big block intakes, including the performer:
http://www.hotrod.com/techarticles/hrdp_0712_mopar_intake_manifold_comparo/index.html
http://www.hotrod.com/techarticles/hrdp_0801_mopar_intake_manifolds/mopar_performance_manifold.html
To bad they didn't test an original inlet.

Frederick

[firefighter3931]

Not really worth the swap, inmo. 


Ron

[Nacho-RT74]

If height is the problem, you're better of with an edelbrock DP4B(only available second hand)

really ? I can get one around I think... but was more toward to "stock" look

[Ghoste]

Paint it and everyone will think it's stock anyway.

[bordin34]

So, how well does a stock 1970 383 4bbl intake flow.

[firefighter3931]

So, how well does a stock 1970 383 4bbl intake flow.

The 70-71 4bbl intakes are generally considered to the best factory manifolds ever cast by Ma Mopar 



Ron

[miller]

So, how well does a stock 1970 383 4bbl intake flow.

The 70-71 4bbl intakes are generally considered to the best factory manifolds ever cast by Ma Mopar 



Ron

What about stock 350 hp 440 intakes?