News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

heater control dissambly

Started by AmadeusCharger500, October 11, 2008, 09:21:01 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

AmadeusCharger500

October 11, 2008, 09:21:01 AM
I am restoring a 74 charger. Working on the heater control assembly. The arm for low-temp-high busted off. I have a donor piece with the handle intact but I cannot figure out how to remove and install it. I took the clip off the bottom to remove the cam pin connecting both arms, but how to remove the arm  from the housing?

Nacho-RT74

#1
October 11, 2008, 09:24:52 AM
only way is removing the knob... will need to make with care since is plastic. Pulling it off
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

AmadeusCharger500

#2
October 11, 2008, 11:33:05 AM
Got it!

thanks
Print
Go Up Pages1
User actions