News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Torque specs on k-frame

Started by AmadeusCharger500, October 09, 2008, 06:27:07 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

AmadeusCharger500

October 09, 2008, 06:27:07 PM
Installing the k-frame with new bushings. How tight?

Can't find it in the manual.

Also....Does the lower control arm spindle(fit through k-frame) get greased?

68RT4ME

#1
October 17, 2008, 02:17:28 PM
Bump.. :bump:
'69 Charger R/T, T5, Tan Top, Tan Interior, Black Stripe. Complete numbers matching 440 4Spd

Ghoste

#2
October 17, 2008, 04:22:29 PM
It's in the section for the front end.  The K frame bolts are 150 ft lbs.  As for greasing the pivot, I have never have but that doesn't mean much.

Steve P.

#3
October 20, 2008, 09:54:53 PM
Truth be told, I have always used the German torque spec, "NIZENTIGHT". I can't think of a time I didn't use my impact on them....  :shruggy:
Steve P.
Holiday, Florida
Print
Go Up Pages1
User actions