Rear valance removal

[GTX]

It's time to begin tearing out my old ('68) valance and corner pieces and putting in new ones.
I remember seeing somewhere a step by step process for gettting them all taken out and then putting in the new ones but I can't find it anymore. Can someone please walk me through it all? Any special tools I should get in advance?
Also, what does everyone recommend for replacement? Year One or are these others like seen on eBay any good?

Thanks!

[694spdRT]

Most every repo panel is made by Goodmark and sold by different distributors whether it is Year One, Paddock, or any of the others.

I would check out 69 Hemi's site for great step by step resto advice.

www.69hemi.com

[palindromes]

My advice would be to get a good spot-weld cutter for those 200 or so welds to drill out.  I also found the set of (large) cheapo welding clamps from harbor freight were really handy for holding things in place when welding it to the rear lip of the trunkpans.  Clecos were also nice to have (the pins as well as clamps) to hold those corners in place.

I've got a few pics of my installation scattered on my webpages at http://www.cardomain.com/ride/612641, but definitely not a step-by-step how-to.