News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Challenger drive shaft question?

Started by 41husk, October 26, 2005, 07:24:12 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

41husk

October 26, 2005, 07:24:12 AM
I recently swaped out my 8 1/4 rear, 318/904 with a 8 3/4 340/904 and my drive shaft is about an inch to long does anyone know how long a drive shaft I need?  I thought the old one would fit since the 904 is still in.  The shaft I have is 4' 5 3/8 " - the yoke.
1969 Dodge Charger 500 440/727
1970 Challenger convertible 340/727
1970 Plymouth Duster FM3
1974 Dodge Dart /6/904
1983 Plymouth Scamp GT 2.2 Auto
1950 Dodge Pilot house pick up

41husk

#1
October 26, 2005, 08:07:33 AM
Chryco answered my ? on the cuda/challenger site.
1969 Dodge Charger 500 440/727
1970 Challenger convertible 340/727
1970 Plymouth Duster FM3
1974 Dodge Dart /6/904
1983 Plymouth Scamp GT 2.2 Auto
1950 Dodge Pilot house pick up

RD

#2
October 27, 2005, 11:50:09 AM
share the knowledge! what was the answer hehe  driveshafts for 8 1/4's and 8 3/4's are different lengths huh?
67 Plymouth Barracuda, 69 Plymouth Barracuda, 73 Charger SE, 75 D100, 80 Sno-Commander

Chryco Psycho

#3
October 28, 2005, 11:26:18 AM
the diff / pinion on the 8 3/4 is slightly longer so the driveshafts are slightly shorter with the 8 3/4 diffs
Print
Go Up Pages1
User actions