New Vent Gasket Installation

[W4ATL]

I have a new vent window gasket for my '68 Charger. I thought I could take out the upper screw on the vent and then slide the vent window out of the bottom and replace the gasket. But it is held on at the bottom. Do I need to take the door panel apart to get to whatever is holding it at the bottom?

[Winged 1]

 
Yes as a minimum you will have to pull the door panels. There is a post that drops down thru the bottom of the tray and has a pin in it that needs to be removed before you can pull the wing out. Might be easier to just pull the whole wing frame out so you can see what your doing,
Best of. It can be done..
Eric