Dana leaking

[astat1]

What are the possibilites as a source for leaking at the rear U joint entering the rear end? What does this involve to fix? Thanks

[62 Max]

You can remove the yoke and change the seal.If its never been apart,make sure you tighten the nut to factory specs or you will change the preload on the bearings.

[440fan]

You can remove the yoke and change the seal.If its never been apart,make sure you tighten the nut to factory specs or you will change the preload on the bearings.

How do you do this and how long does it take? Thanks.

[440fan]

Anyone? Thanks.

[twinscrew698]

Here is a link to a movie that Chrysler put out in 1974 on the 9.25 but same procedure...

Hope this helps
http://www.imperialclub.com/Repair/Lit/Films/319/

[440fan]

Very cool movie! Thanks.