radiator support black out treatment

[hemi68charger]

Hey gang...
What do ya'll use for your black out treatment on the radiator core support or better yet, what was used originally.. Basic flat black? I'm sure it's not rocket science.......
Working on my '68 Hemi Charger R/T.

Cheers,
Troy

[Charger-Bodie]

Once again Troy , You guessed it on you're own!! Flat black.

[gtx6970]

OE is Organasol

or spray out some flat black and pull away on the last coat to get a slight texture to it

[hemi68charger]

Thanks B-squared.............  Brian and Bill..

That's what I thought.. I may paint to core support this long weekend... Start selling some extra parts to start paying for me stuff.. I have a good E-body rimblow that I can use to finance or help finance the fuel and brake lines... Side marker lights go on this weekend for sure.....................

Cheers,
Troy

[hemi-hampton]

As far as I know it is not Organasol. Organasol has a rough pebbley texture to it which these core supports do not have. Flat black it is. I use DP90 sometimes or flatblack spray bomb. LEON.

[TUFCAT]

Its definitely not organosol .  I matched mine almost perfectly with some SEM Trim Black. It's not a heavy duty flat, nor close to a satin.  Its basically a NO sheen flat. Make sure you have that thin "oversprayed edge line" so it can fade out...... I'm sure you already know that it was sloppily, and carelessly applied by some hippie under the influence of marijuana or LSD. 

[1969chargerrtse]

Its definitely not organosol .  I matched mine almost perfectly with some SEM Trim Black. It's not a heavy duty flat, nor close to a satin.  Its basically a NO sheen flat. Make sure you have that thin "oversprayed edge line" so it can fade out...... I'm sure you already know that it was sloppily, and carelessly applied by some hippie under the influence of marijuana or LSD.