Latch tray bolt length? Update: Cheap source for these bolts...

[Daytona R/T SE]

I'm about to order the bolts to hold down my latch tray. I know from is thread:

http://www.dodgecharger.com/forum/index.php/topic,18978.0.html

that they should be 1/4-20 with a loose washer and a 7/16 head...

My question is what length should they be?  I'm planning on ordering them from R/T specialties...

If somebody could point out which ones to order that would be great

[nascarxx29]

I rememeber them being less than a inch maybe.They had the captured washer with the anchor logo on the top.It might be mentioned in this link on daytona details

http://wwnboa.org/daytdetpt2.htm

[Daytona R/T SE]

I checked the Daytona details page before posting this-if it's mentioned there, I missed it...

[nascarxx29]

This page if from a reference chart for a 69 daytona restorer the center bolt on first line maybe the latchtray one

[hemigeno]

I thought Badalson had a latch tray fastener set that he sold?  It's been a while since I went through his catalog stuff though.  Might be worth checking out, just in case my vague recollection turns out not to be too far off base...   

[A383Wing]

This page if from a reference chart for a 69 daytona restorer the center bolt on first line maybe the latchtray one

Yup...that's the one in the center

Bryan

[Daytona R/T SE]

Ok, Guys-thanks for the info. I think I've found it-this one is 1/4-20 by 15/16ths long

(This picture shamelessly swiped from R/T Specialtie's website)

Whady'all think? 

[Daytona R/T SE]

Or...Could it be the 3/4 

Again,this pic was shamelessly swiped from R/T Specialtie's website 

[nascarxx29]

when I got them I found them at Auveco fastners but you had to buy a whole box

[BigBlockSam]

i used 1/4 inch on mine

[gtx6970]

when I got them I found them at Auveco fastners but you had to buy a whole box

Auveco fasteners are no where near OE correct

[gtx6970]

that they should be 1/4-20 with a loose washer and a 7/16 head...

[62 Max]

Really makes no difference in length if the head is correct.Its all under the latch tray anyway,you can't see them.If you can find a Wesco distributor,you can buy a box of 50 #. 735 loose washer,correct length for around $7.00

[Hemi_tyme]

Really makes no difference in length if the head is correct.Its all under the latch tray anyway,you can't see them.If you can find a Wesco distributor,you can buy a box of 50 #. 735 loose washer,correct length for around $7.00

Hey 62, Do they have the correct head? I looked all over the internet and couldn't find a wesco distributor in my area. Any web sites ? Thanks Ken

[Daytona R/T SE]

Hey 62, Do they have the correct head? I looked all over the internet and couldn't find a wesco distributor in my area. Any web sites ? Thanks Ken

   What he said 

[moparstuart]

 i would like a box of those also !!!!

[BigBlockSam]

try a bodyshop distributor.

[62 Max]

try a bodyshop distributor.

Wesco Fasteners is in NJ.  Body shop supply distributor.

[nascarxx29]

I seen a place called Wesco in Washington Twp Turnersville NJ.Is that where there located .I seen this place in a industrial park near me never been there or in it

[62 Max]

Thats it,now you can get rich!

[Daytona R/T SE]

I found a cheap source for these bolts. They are NOT OEM correct, so I wouldn't use them on an original wing car,(Purists BEWARE) but since my car is a clone, and I'm a tight-ass and R/T specialties wants a buck a bolt, I've been looking around....

I found something REAL close here: http://www.fastenal.com/

It's a 1/4-20 with a captive 3/4" washer, 7/16th head, 7/8" long with a "dog" point on the end...black....close enough for me..

They have a store here locally that just opened up a while ago.

Went in, checked them out...

$13 bucks for a box of 50 

Yes they are AUVECO brand, not "correct" but close enough for us Cloners...

[nascarxx29]

I think it was 62 Max told us about Westco co fasteners.I never used them or know there prices

[maxwellwedge]

Well - Disco has the bolts as shown above with the captive washer around the same diameter as the head. Doc has a way larger diameter washer. I can measure the both and post sizes, head markings if you want.

[moparstuart]

Well - Disco has the bolts as shown above with the captive washer around the same diameter as the head. Doc has a way larger diameter washer. I can measure the both and post sizes, head markings if you want.

pictures please

[johntpr]

Frank Badalson sells a whole kit with right bolts and J nuts. They are in his catalog.     www.rogergibsonautorestoration.com