lunati voodoo cams

[darkside]

These cams have been out for a wile and i was wondering if anyone has  ran any of these and
dynoed a  mildly built 440 with the 268 voodoo cam  pt #60303lk.

[Blown70]

I believe Cryco likes some of the Voodoo grinds.... maybe he will chime in.

[Musicman]

In this catagory, I like both the VooDoo and Engle cams myself... I'm using a Lunati Voodoo cam in the 440 6-Pak stroker that I'm building now

[firefighter3931]

The 268 VooDoo is a descent grind....works well with 2600-2800 stall and 3.55+ gears. 

Ron

[flyinlow]

I used the 60303 cam in my 446 /10.5cr/eddy heads, rpm intake/3.54 /727 with mopar 11 inch converter/800 eps carb

Works well ,idles 800, power brakes and trans. happy. Hard on back tires. 12 mpg.

[darkside]

I used the 60303 cam in my 446 /10.5cr/eddy heads, rpm intake/3.54 /727 with mopar 11 inch converter/800 eps carb

Works well ,idles 800, power brakes and trans. happy. Hard on back tires. 12 mpg.

how does the 60303 sound? Does it make good low end torque? I'd still like to see some dyno numbers with this cam.

[MSRacing89]

I used the 60303 cam in my 446 /10.5cr/eddy heads, rpm intake/3.54 /727 with mopar 11 inch converter/800 eps carb

Works well ,idles 800, power brakes and trans. happy. Hard on back tires. 12 mpg.

how does the 60303 sound? Does it make good low end torque? I'd still like to see some dyno numbers with this cam.

I would say I am happy with the cam at this point.  I think it is right in the ballpark for that build.  I have 440. 9.8:1, BIGS 750, ported 452's, RPM, 3.23, and 2500 stall.

[flyinlow]

Sounds good at idle, 3 inch pipes/magnafows . No specs on HP. Took to track once. 13.4/105.5 / hot day, tires spinning alot . Goobs of low/midrange torque. At the Mopar nats people kept throwing water in the street on the Rt.79 tour. I told them we did not need it .