News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

upper contol arm bushing sleeve

Started by AmadeusCharger500, August 15, 2008, 01:19:55 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

AmadeusCharger500

August 15, 2008, 01:19:55 PM
Do these need to be saved and reused when doing a rebuild?
The replacements I recieved did not inlcude the sleeve.

Rolling_Thunder

#1
August 15, 2008, 01:57:23 PM
Alot of people do not install them with the new bushings...        replacements can be purchased through Magnum HP    :2thumbs:
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

AmadeusCharger500

#2
August 15, 2008, 03:19:09 PM
The new bushing has enough support without the metal sleeve?
I am just in the process of removing each by drilling and cutting the bushing out.  I am just concerned about nicking the sleeves, which  I see I have allready done on one of them.  I will be able to reuse it but perhaps one or 2 might get damaged in this process.

MTPOCKET

#3
August 19, 2008, 09:12:58 PM
Don't drill on the upper bushing to remove see picture for a better ideal on removing and installing them.

Back N Black

#4
August 20, 2008, 12:39:45 PM
I just used a bench vice and a couple of sockets to press them out.  :Twocents:
Print
Go Up Pages1
User actions