News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Trunk floor question...68 vs 69

Started by C500, August 13, 2008, 04:34:56 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

C500

August 13, 2008, 04:34:56 PM
Couldn't find the answer searching the site, so hope someone can give me an answer:

Are the 68 and 69 trunk floors the same? Have heard the filler neck hole is slightly different? I'm about to get a couple from AMD, one for each year charger.

Any info appreciated.

Thanks.
"An aggressive exterior with power to match was enough to pull in the performance boys-especially when abetted by a pair of pipes blaring out the back, and brawny red-sidewall rubber hitting the pavement."  

"........the four speed box changes cogs with the precision of a sharp axe striking soft pine."

gasoline_24

#1
August 13, 2008, 09:59:55 PM
I just got the AMD one piece and it is amazing.  I am not sure there is a difference other than the spare tire holder.

C500

#2
August 13, 2008, 10:42:46 PM
Just had a reply back from AMD. They produce one floor for both years and did tell me 68 and 69 filler holes are different sizes. They make the floor with the smaller opening so you can open it up more if you need larger opening. Couldn't tell me which year their floor was correct for. Have ordered the floor anyhow. Looking forward to seeing it in.
"An aggressive exterior with power to match was enough to pull in the performance boys-especially when abetted by a pair of pipes blaring out the back, and brawny red-sidewall rubber hitting the pavement."  

"........the four speed box changes cogs with the precision of a sharp axe striking soft pine."
Print
Go Up Pages1
User actions