Inner fender splash shields, looking for input 1968 to 1970 B-body

[gtx6970]

Here is what i've assembed so far. these are for the rear splash shields sections only , anyone care to add input as to additional years or suggestions.As i'm looking to more info as to additional years and or applications . OE only please. I don't plan to put a generick kit together at this point

[gtx6970]

nobody has splash shields ?

[hemi-hampton]

What you got pictured looks about right. There is another place here in Michigan that sells the rear splash sheild bolts also, the ones with the big washer. Forgot their name but thay also make that inner door handle reinforcement plate which I used. LEON.

[gasoline_24]

Are you selling the bolt kit?  If so I will take one for each side.

[gtx6970]

What you got pictured looks about right. There is another place here in Michigan that sells the rear splash sheild bolts also, the ones with the big washer. Forgot their name but thay also make that inner door handle reinforcement plate which I used. LEON.

that would be Neal at Dynamic Renovation, and all he sells is the washer - the bolt must be re-used.

Yes, i am now selling kits - either with or without the screws for the plastic front shields 

[gtx6970]

Are you selling the bolt kit?  If so I will take one for each side.

the kit shown does both sides of the car. I'm still researching the earlier and later B-bodies as well as the E-bodies in regards to quanities and sizes of each

[hemi-hampton]

I got some factory bolts, ect for splash sheild from a 67 Coronet R/T Convertible I'm restoring but I dont remember them being any different then later years. LEON.

[resq302]

Bill, what plastic front splash shield are you talking about?  The only plastic splash shield I have on my charger is down by the k-frame and is held on by 2 pop rivets.

[gasoline_24]

Good question Brian.  I was wondering the same thing.  I think he means either the metal ones up front that are repoped by AMD or the rear splash shields.  I need the bolts for both of these.  If you have both sets how much are they?

[gtx6970]

whoops, 1968 B-body front shields are shown. I was thinking E-body . the fronts on them are indeed plastic

[gtx6970]

Rear shields 1968 B-body.
Pics compliments of Troy aka hemi68charger - nice car btw


fastener kits for the rear shields is $30 - does both sides
screws for the front shields are $1 each
in other words all the fasteners for the shields front and rear / both sides (excluding the clips - but i'm working on those now ) is $34 plus postage

[gtx6970]

screws for the front shields shown. also used on washer reservoirs 1972 and later . as well as the air grabber box and seal mounting 1969-70 B-bodies ALSO found on some E-bodies for the inner fender sheilds instead of the larger ones shown above

[gasoline_24]

I will take a set.  Where do I send the $34?

[gtx6970]

I will take a set.  Where do I send the $34?

pm sent