News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Dana rear question...

Started by J-440, August 30, 2008, 08:31:15 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

J-440

August 30, 2008, 08:31:15 AM
  Bought a Moser Dana rear 4.10, with 35 splines and am curious as to why the left side axle keeps pushing itself out as I try to tighten the hold down bracket, while the right side slips in with no problems.  Yes the axles are on the proper sides as the left one is longer then the right.  I know its not a C-clip rear (Chevy) since there were no C-clips that came with the unit.  What's the damn deal?
68 R/T, 440/727 6-speed, SC G-machine...black suede

Rob R

#1
August 30, 2008, 10:15:28 AM
The thrust button should have been left out when it was changed over to 35 spline...what alxe brgs are on the axles...A7's or green brgs?

J-440

#2
August 31, 2008, 06:57:05 PM
 Rob, I'm using the Wilwood "green" bearings.  I'm assuming I need to replace or mod something?  Thanks again.
68 R/T, 440/727 6-speed, SC G-machine...black suede
Print
Go Up Pages1
User actions