News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Vacuum Advance Module

Started by 69hemi, July 16, 2008, 04:27:00 PM

Previous topic - Next topic

69hemi

Does anybody have a source for a new Vacuum advance module for a 69 440 single point distributor?

Thanks for the help guys!
http://www.69hemi.com
1969 Hemi R/T Charger
1969 440 GTX
1965 Hemi A/FX Plymouth
1964 Hemi Superstock Dodge
02 Ram
95 Ram

hutch

In the words of Colonel Sanders,,,   "I'm too drunk,,, to taste this chicken"

PocketThunder

Quote from: 69hemi on July 16, 2008, 04:27:00 PM
Does anybody have a source for a new Vacuum advance module for a 69 440 single point distributor?

Thanks for the help guys!

I just bought one yesterday, Neihoff part #AL301 at Checker Auto Parts.

Paul
in Minnetonka
"Liberalism is a disease that attacks one's ability to understand logic. Extreme manifestations include the willingness to continue down a path of self destruction, based solely on a delusional belief in a failed ideology."

69hemi

NAPA does not have access to them anymore but Checkers came through for $19.00!

Thanks Paul!
http://www.69hemi.com
1969 Hemi R/T Charger
1969 440 GTX
1965 Hemi A/FX Plymouth
1964 Hemi Superstock Dodge
02 Ram
95 Ram

PocketThunder

Quote from: 69hemi on July 17, 2008, 01:57:01 PM
NAPA does not have access to them anymore but Checkers came through for $19.00!

Thanks Paul!

Man you paid too much, mine was $17.99!  :nana:
"Liberalism is a disease that attacks one's ability to understand logic. Extreme manifestations include the willingness to continue down a path of self destruction, based solely on a delusional belief in a failed ideology."

69hemi

Quote from: PocketThunder on July 17, 2008, 02:19:43 PM
Quote from: 69hemi on July 17, 2008, 01:57:01 PM
NAPA does not have access to them anymore but Checkers came through for $19.00!

Thanks Paul!

Man you paid too much, mine was $17.99!  :nana:

The best part is now I can have the distributor set up and finish up the GTX motor.  440 with .30 overbore, 1/4" stroker kit, intake and exhaust maniforls all port matched, full head job and a wicked Comp cam and it looks totally stock.
Should be a lot of fun! :2thumbs:
http://www.69hemi.com
1969 Hemi R/T Charger
1969 440 GTX
1965 Hemi A/FX Plymouth
1964 Hemi Superstock Dodge
02 Ram
95 Ram

PocketThunder

Jet,

As i found out last night the Niehoff part is not the same as the one on my car.  With the Niehoff part the arm that goes into the distributor bends down and the pin is facing down.
I called paddock and they have the correct part (pad02911) that matches my existing one, with the arm bending up and the pin facing up as shown in the picture below.  But, they are one 2~4 week back order.   :brickwall:  They confirmed over the phone that this part is not the same part made by Niehoff.

Paul
"Liberalism is a disease that attacks one's ability to understand logic. Extreme manifestations include the willingness to continue down a path of self destruction, based solely on a delusional belief in a failed ideology."

69hemi

Quote from: PocketThunder on July 18, 2008, 12:47:53 PM
Jet,

As i found out last night the Niehoff part is not the same as the one on my car.  With the Niehoff part the arm that goes into the distributor bends down and the pin is facing down.
I called paddock and they have the correct part (pad02911) that matches my existing one, with the arm bending up and the pin facing up as shown in the picture below.  But, they are one 2~4 week back order.   :brickwall:  They confirmed over the phone that this part is not the same part made by Niehoff.

Paul

So if mine is wrong I get  to blame you?:scratchchin:
http://www.69hemi.com
1969 Hemi R/T Charger
1969 440 GTX
1965 Hemi A/FX Plymouth
1964 Hemi Superstock Dodge
02 Ram
95 Ram

PocketThunder

After further research the one from Niehoff is for a small block, the pin points down. 

I found one thru a local member that i'm picking up tonight or tomorrow, so you can have my paddock one when it comes in 2~4 weeks.  does that help?   :shruggy:

Try calling Bumper to Bumper, the part number is either VC-154 or VC-155.
"Liberalism is a disease that attacks one's ability to understand logic. Extreme manifestations include the willingness to continue down a path of self destruction, based solely on a delusional belief in a failed ideology."

69hemi

Quote from: PocketThunder on July 18, 2008, 03:32:45 PM
After further research the one from Niehoff is for a small block, the pin points down. 

I found one thru a local member that i'm picking up tonight or tomorrow, so you can have my paddock one when it comes in 2~4 weeks.  does that help?   :shruggy:

Try calling Bumper to Bumper, the part number is either VC-154 or VC-155.

Can you send me a pix of the one you pick up tonight?
Thanks man!
jet@69hemi.com
http://www.69hemi.com
1969 Hemi R/T Charger
1969 440 GTX
1965 Hemi A/FX Plymouth
1964 Hemi Superstock Dodge
02 Ram
95 Ram

PocketThunder

I already put it in the car, but here is the one i took out, its exactly the same.

Paul
"Liberalism is a disease that attacks one's ability to understand logic. Extreme manifestations include the willingness to continue down a path of self destruction, based solely on a delusional belief in a failed ideology."