440 rebuild driving me crazy,ahhhhhh!

[superbee1]

Here is my situation:
I have a '67 hp 440 block that has been bored .030. What I am wanting is just a solid performing street machine, nothing outrageous. I want to run thr stock converter with the 2.76 gears it came with (these will sonn be changed). I am going to run the 452 heads i have up top. I had decided on the speed pro 2355's from summit but the don't have them right now in .030 over. Is there a comparable piston around the same price that would work well? MAybe a silvolite even though they are not forged? I am going to go with a proform 750 carb and a voodoo 628 grind. You guys have always been great help and I appreciate all your help.

Probably gunna need header and intake advise too if you wanna throw that in too.

[grdprx]

I'm having the same problem trying to get Speed pro 2355's!  I ordered mine in early May, was told I'd have them the first week of June.  I needed .060

Now it's the 1st week of July.  I got pissed, so I called up Mancini to see if they could do any better.  They told me the 2355's were discontinued.

Any suggestions for a comparable piston?

[RD]

i have actually had good luck with KB's, but many on this board will call me crazy because it is not a forged piston.

found that to be interesting considering all of our engines came out of the factory with cast pistons.