Help with jets (Holley 750)

[73ChargerSE]

Basics:
400 bored .30
KB Hypereutetic 9.5 to 1
.525 Lift Cam 275/287 Duration 110 Centerline 231/237 at .050
440Source Stealth Heads
Static compression around 10.05 to 1
Mopar Performance 1.5 ratio roller rockers
Edelbrock Performer RPM
Holley 750 Double Pumper (3310)

What jets should I use in this carb to maybe get it close to being correct? What jets come in these carbs out of the box? 

Paul

[John_Kunkel]

You might find that the carb works best right out of the box, try that first.

A 3310 isn't a double pumper.

[firefighter3931]

You might find that the carb works best right out of the box, try that first.

A 3310 isn't a double pumper.

I agree with  John....start with the stock jetting. I think it's 72/80 with a 6.5 PV but it's been years since i fooled around with a vac secondary carb so don't quote me on those jet sizes. 

Yes, the 3310 is a vac secondary carb....no accelerator pump or metering block on the secondaries. 



Ron