News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

How many miles do I need to put on the new cam before I can do exhaust?

Started by 2Gunz, May 21, 2008, 12:18:56 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

2Gunz

May 21, 2008, 12:18:56 AM


I have a new cam how many miles do I need to put on it before I can put on the new headers?


Thanks

NorwayCharger

#1
May 21, 2008, 12:39:50 AM
If you have some sort of ceramic coating on the headers, you can put them on after 30 min  :popcrn:
AKA the drummer boy
http://www.pink-division.com

Rolling_Thunder

#2
May 21, 2008, 02:50:16 AM
Quote from: NorwayCharger on May 21, 2008, 12:39:50 AM
If you have some sort of ceramic coating on the headers, you can put them on after 30 min  :popcrn:

:2thumbs:
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

375instroke

#3
May 21, 2008, 03:41:11 AM
I think you should worry about the air/fuel ratio being correct.

2Gunz

#4
May 21, 2008, 04:31:12 AM
I do have ceramic coating....

And I figured it was a few hundred miles..........

Awesome!

defiance

#5
May 21, 2008, 02:55:25 PM
Just curious - the reason for the recommended wait time - is it that the egt's are much higher during break-in period?
If that's the case, would it still be a concern for stainless headers?  I've been considering them anyway, just because I want to never have to worry about rusting out, but man they're freakin' expensive...
Print
Go Up Pages1
User actions