News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Had my car dyno'ed

Started by jwilk01, May 18, 2008, 03:51:14 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

jwilk01

May 18, 2008, 03:51:14 PM
Well had my car dynoed at work, they had a dyno set up for a Honda S2000 meet.  They let me run my car on it for free since I work there.  A little disapointing they didn't really hammer the car down and it was pretty obvious.  It had a max hp of 210 and 292 ft. lbs of torque at like 3000 rpms.  I will try and post the video of it.

Later
Josh


http://smg.photobucket.com/albums/v506/jwilk1003/?action=view&current=dynoday003.flv

rusty lee

#1
May 18, 2008, 04:01:03 PM
what motor you got? cool car  :2thumbs:

jwilk01

#2
May 18, 2008, 04:24:42 PM
It is a 440 with all 6 pack stuff inside the block.

Later
Josh

Brock Samson

#3
May 18, 2008, 07:04:26 PM
nice  :yesnod:

myk

#4
May 19, 2008, 03:12:49 AM
That was awesome.  Too bad you didn't film the reactions of the Honda boys while your car was ROARING.  210hp though?  I get the impression that your car is pretty healthy so WTF is that all about?

jwilk01

#5
May 19, 2008, 07:42:07 AM
Yeah there was quite a crowd around watching my car on there.  They didn't take the car up to the redline like they were the Honda's, I am assuming because it didn't have a rev limiter on it.  I asked if I could get up there and run it right, I have seen some dyno runs before and these guys didn't really seem to do it like I have seen in the past.  Afterwards I did a about a 70 foot burn out and said that I had never seen a 4000 lbs at 210 hp do that.

Later
Josh

myk

#6
May 19, 2008, 04:41:16 PM
They didn't take it up to redline because your car is big, loud and it was scaring them...

firefighter3931

#7
May 19, 2008, 08:11:53 PM
Quote from: jwilk01 on May 19, 2008, 07:42:07 AM
Afterwards I did a about a 70 foot burn out and said that I had never seen a 4000 lbs at 210 hp do that



Ya, no kidding !  :lol: The Honda boys didn't rpm the motor because they didn't want to frag their little dyno  :D

Don't worry Josh....your car is making a lot  more than 210hp to the rear wheels.  ;)



Ron
68 Charger R/T "Black Pig" Street/Strip bruiser, 70 Charger R/T 440-6bbl Cruiser. Firecore ignition  authorized dealer ; contact me with your needs

mikepmcs

#8
May 19, 2008, 08:26:46 PM
The last line says it all..."Man that sounded good" :2thumbs:

Nice car!!

v/r
Mike
Life isn't Father Knows Best anymore, it's a kick in the face on a saturday night with a steel toed grip kodiak work boot and a trip to the hospital all bloodied and bashed.....for reconstructive surgery. But, what doesn't kill us, makes us stronger, right?

ChgrSteve67

#9
May 19, 2008, 10:25:56 PM
At the time I had a fairly stock 383, 4 speed and a 600cfm carb - it dyno'ed at 245 HP and 319 ft @ the wheels.

They obviously didn't get on it or know how to drive it.

Here is a vid of mine.
They guys that Dyno'ed mine were also a little scared to really get on it because the motor only had about 450 miles on the rebuild.
http://www.capitalptcruisers.org/SPic/ChargerDyno1Small.wmv

I plan on Dynoing my Charger after its put back together to see if the Fuel Injection and 5 speed makes a difference.

Great Vid of your Charger!  Sounds Great.

Steve

myk

#10
May 19, 2008, 11:11:06 PM
Quote from: ChgrSteve67 on May 19, 2008, 10:25:56 PM
At the time I had a fairly stock 383, 4 speed and a 600cfm carb - it dyno'ed at 245 HP and 319 ft @ the wheels.

They obviously didn't get on it or know how to drive it.

Here is a vid of mine.


Damn.  I don't particularly care for 1st 'gens but your car looks and sounds great.  The wheels actually work on your car...
Print
Go Up Pages1
User actions