Steering arm installation - do the washers go inside the K-member or outside?

[Corellian Corvette]

I'm putting in a firm feel fast-ratio steering arm. The kit comes with the arm, 2 foam/rubber "spacers", and 2 washers.

My assumption is that the larger washers go on the outside of the K-member where the bolt/nut secure the arm to the K-member.

However, the whole in the k-member is pretty big, and even when I tighten the bolt it's still pretty loose inside

Do the washers go on the outside? Or do they go on the inside and help space the arm?

Thanks!

[Just 6T9 CHGR]

The washers go on the inside of the k-frame bracket....on top, one on bottom.
The foam seals/dust covers first on either side of the idler arm, then the washers on either side of the idler....

[Corellian Corvette]

Thank you!! Exactly the picture I needed. Much appreciated!