Engle K56/K58 Camshafts--1 Bolt or 3

[Chatt69chgr]

Concerning Engle K56/K58 cams.  Does the timing gear attach to this cam with 1 bolt or 3 bolts?  I am looking at the timing chains and gears over at the 440 source site and just noticed that you have to know this basic piece of info the first thing to begin your selection of one of their timing chain/gear sets.  I went over to the Engle site but they don't have any pictures on it nor do they indicate how these cams are configured in this area.

[metallicareload99]

You can get your Engle cam with either the three or the single bolt set up when you order it.  I went for the three bolt 

[doctorpimp]

Yep.
They ask you which one you want.
Most guys go for 3 bolt.

[Chatt69chgr]

Many thanks guys. 

[694spdRT]

3 bolt K56/K58 for me too. 

[grdprx]

So, to piggy back off this post; I'm rebuilding my 440, and Engle asked me if I wanted 1 or 3 bolt for my cam.  I'd never heard of this.

Can I pick?  I haven't gotten the timing chain or anything else yet. 

[Charger-Bodie]

So, to piggy back off this post; I'm rebuilding my 440, and Engle asked me if I wanted 1 or 3 bolt for my cam.  I'd never heard of this.

Can I pick?  I haven't gotten the timing chain or anything else yet. 

yes you can, just get a 3 bolt timing set to match and you're good to go.

[Just 6T9 CHGR]

I used the stock one bolt on mine....